Vivotek CC9381-HV User Manual page 9

2. Attach the alignment sticker to a preferred location. Drill a cabling hole and the pilot
holes for the mounting screws. Route cables through the routing hole.
Drill hole ( camera )
Cable hole
Lens
Drill hole(camera)
P/N : 621055300G
CAT5
3. When connecting the Ethernet cable, use the cable housing to make sure the
connections are waterproof.
3-1. Pass an Ethernet cable through the seal dome, rubber seal, and the cable gland
body.
3-2. Properly install and fasten the components of the cable gland.
3-1
3-2
VIVOTEK
User's Manual - 9