Vivotek CC9381-HV User Manual page 336

VIVOTEK
© 2019 VIVOTEK INC. All Right Reserved
NAME
panspeed
tiltspeed
zoomspeed
autospeed
focusspeed
focusmode
uart
isptz
preset_i<0~(k-1)>_name string[40]
preset_i<0~(k-1)>_zoom capability_ptz_
336 - User's Manual
VALUE SECURITY
(get/set)
-5 ~ 5 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
-5 ~ 5 1/4
auto,onetimeau 1/4
to,spotlight,ma
nual
* Available
values are
listed in
"capability_cam
ctrl_c<0~(n-1)>
_focusmode"
0 ~ 1/4
"capability_nua
rt"-1
0 ~ 2 1/4
1/4
1/4
c<0~(n-1)>_min
zoom ~
capability_ptz_
c<0~(n-1)>_ma
DESCRIPTION
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have to
be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
Pan speed
Tilt speed
Zoom speed
Auto pan speed
Auto focus speed
Indicate the focus control mode.
Select corresponding uart
(capability_nuart>0).
0: disable PTZ commands.
1: enable PTZ commands with PTZ
driver.
2: enable PTZ commands with UART
tunnel.
* Only available when bit7 of
capability_ptzenabled is 1
Name of the preset location.
Zoom position at each preset location.
207