Vivotek CC9381-HV User Manual page 335

© 2019 VIVOTEK INC. All Right Reserved
NAME
preset_i<0~(k-1)>_nam
e
preset_i<0~(k-1)>_
dwelling
uart
cameraid
isptz
disablemdonptz
7.41 Camera PTZ Control (IZ Series)
Group: camctrl_c<0~(n-1)> for n channel products
capability_camctrl_c0_buildinpt = 0)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
ccdtype
motortype
cameraid
VALUE SECURITY
(get/set)
string[40] 1/4
0 ~ 999 1/4
0 ~ " 1/4
capability_nuar
t"-1
0~255 1/4
0 ~ 2 1/4
<boolean> 1/4
(capability_camctrl_c0_zoommodule = 1 and
VALUE SECURITY
(get/set)
string[16] 6/7
string[16] 6/7
0 ~ 255 1/4
DESCRIPTION
The dwelling time of each patrol point,
separated by ","
Name of the preset location.
The dwelling time of each preset
location
Select corresponding uart
(capability_nuart>0).
Camera ID controlling external PTZ
camera.
0: disable PTZ commands.
1: enable PTZ commands with PTZ
driver.
2: enable PTZ commands with UART
tunnel.
* Only available when bit7 of
capability_ptzenabled is 1
Disable motion detection on PTZ
operation.
DESCRIPTION
(Internal used, read only)
(Internal used, read only)
Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
VIVOTEK
206
User's Manual - 335