Vivotek CC9381-HV User Manual page 221

© 2019 VIVOTEK INC. All Right Reserved
NAME VALUE
profile_i<0~(m-1)> 0~100
_sharpnesspercent
profile_i<0~(m-1)> 0~100
_gammacurve
profile_i<0~(m-1)> <boolean>
_lowlightmode
<product
dependent>
profile_i<0~(m-1)> <boolean>
_hlm
<product
dependent>
profile_i<0~(m-1)> <boolean>
_dnr_mode
SECURITY DESCRIPTION
(get/set)
saturation
* Only available when bit 2 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.
4/4 Set sharpness in the normalized
range.
0: Softer <-> 100: Sharper
* Only available when bit 3 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1
4/4 0: Fine-turned gamma curve by
Vivotek.
1: Gamma value = 0.01
2: Gamma value = 0.02
3: Gamma value = 0.03
...
100: Gamma value = 1
* Note: Although we set gamma value
to 100 level, but not all gamma values
are valid. Internal module will take the
closest valid one. For example, 1~45
may all be mapped to gamma value =
0.45, etc.
* Only available when
"capability_image_c<0~(n-1)>_gamm
acurve" is 1
4/4 Enable/disable low light mode.
* Only available when
"capability_image_c<0~(n-1)>_lowligh
tmode" is 1
4/4 Enable/disable hightlight mask.
* Only available when
"capability_image_c<0~(n-1)>_hlm" is
1
4/4 3D noise reduction.
0:disable
VIVOTEK
92
User's Manual - 221