Vivotek CC9381-HV User Manual page 339

© 2019 VIVOTEK INC. All Right Reserved
7.42 Camera PTZ Control (SD Series)
Group: camctrl_c<0~(n-1)> for n channel products
bit4 of capability_ptzenabled is 1)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
ccdtype
motortype
cameraid
panspeed
tiltspeed
zoomspeed
autospeed
focusspeed
focusmode
preset_i<0~(k-1)>_name string[40]
preset_i<0~(k-1)>_pan
(the bit7 of capability_ptzenabled is 0 and the
VALUE
string[16]
string[16]
1 ~ 255
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
auto,onetimeauto,sp
otlight,manual
* Available values are
listed in
"capability_camctrl_c
<0~(n-1)>_focusmod
e"
capability_ptz_c<0~(
SECURITY DESCRIPTION
(get/set)
6/7 (Internal used, read only)
6/7 (Internal used, read only)
1/4 Camera ID controlling external
PTZ camera.
Note:
Please set your speed dome to
the appropriate baud rate, and
Camera ID, e.g. 2400bps, camera
ID 1,2,3,,,,etc.
All Camera IDs on the same
controlling system (NVR or rs485
keyboard) have to be distinct.
Therefore, once you send a
controlling signal, each camera
will only accept the inputs with
the corresponding ID.
1/4 Pan speed
1/4 Tilt speed
1/4 Zoom speed
1/4 Auto pan speed
1/4 Auto focus speed
1/4 Indicate the focus control mode.
1/4 Name of the preset location.
1/4 Pan position at each preset
VIVOTEK
210
User's Manual - 339