Page 2
Before you install, you need to decide: The Outdoor Siren should be mounted on the • How are you going to power your Outdoor Siren? outside of your home. Choose a place that • Where are you going to mount it?
Page 3
Before you begin Note: Make sure your alarm system is set up and 1. In app setup working in the Ring app before you install. Start by opening the Ring app and You’ll need these tools: tap to open the menu.
Page 4
Press the Test button inside the battery compartment 2. Mark your holes using the mounting on the back of the Outdoor Siren. The LED lights on bracket as a guide. the front will flash — this may take up to 30 seconds.
Page 5
• Carefully insert Quick Release Battery Pack, starting You can use one or multiple power sources to with the pin side first. power your Outdoor Siren, and can set them up in any order. If you plan to use the Dusk to Dawn Solar Panel light setting, you must have more than one power •...
Page 6
• Ensure an indoor power outlet is within range and the mounting bracket. Tighten the security the power cable can be ran to the Outdoor Siren. screw on the bottom of the bracket. • Not intended to be plugged into an outlet outside.
Need help?
Do you have a question about the Outdoor Siren and is the answer not in the manual?
Questions and answers