Download Print this page

ring BASE STATION Basic Setup

Hide thumbs Also See for BASE STATION:

Table of Contents

Download this manual

Ring Base Station

Ring Base Station - Basic Setup

Table of Contents

Need help?

Do you have a question about the BASE STATION and is the answer not in the manual?

Page 1 Ring Base Station Ring Base Station - Basic Setup...
Page 2 Smart Start Inclusion Steps: 1. Initiate add device flow in the Ring Alarm mobile application – Follow the guided add flow instructions provided in the application 2. Scan the QR code found on the package of the device or the QR code found on the back of the device Classic Inclusion Steps: 1.
Page 3 Note: Joining another Z-wave network via learn mode is available only when the base station is not already paired to any other devices Ring Base station – Exclusion Removing a Base station to a Z-Wave Network Exclusion Instructions: 1. Start exclusion mode on the primary controller 2.
Page 4 Ring Base station – Lifeline Association This base station has Group 1 is the “Lifeline” group, which can hold one devices. Base station will send device reset locally notification to this group. Ring Base station – Reset Factory Default Instructions 1.