Charging With Refrigerant - Daikin 3MXS40K2V1B Installation Manual

Refrigerant Piping Work
5.
Refilling the refrigerant
Check the type of refrigerant to be used on the machine nameplate.
Precautions when adding R410A
Fill from the gas pipe in liquid form.
It is a mixed refrigerant, so adding it in gas form may cause the refrigerant composition to change, preventing normal operation.
1) Before filling, check whether the cylinder has a siphon attached or not. (It should have something like "liquid filling siphon
attached" displayed on it.)
Filling a cylinder with an attached siphon
Stand the cylinder upright when filling.
There is a siphon pipe inside, so the cylinder
need not be upside-down to fill with liquid.
2) Be sure to use the R410A tools to ensure pressure and to prevent foreign objects entering.
6.

Charging with refrigerant

1) If the total length of piping for all rooms exceeds the figure listed below, additionally charge with 20g of refrigerant (R410A)
for each additional meter of piping.
Outdoor capacity class
Total length of piping for all rooms
■ For cooling only
• Cooling only models (3MKS50, 4MKS58) are chargeless. There is no need to charge with refrigerant.
Important information regarding the refrigerant used
This product contains fluorinated greenhouse gases covered by the Kyoto Protocol.
Do not vent gases into the atmosphere.
R410A
Refrigerant type:
(1) 1975
GWP value:
Please fill in with indelible ink,
the factory refrigerant charge of the product,
1
the additional refrigerant amount charged in the field and
2
the total refrigerant charge
1 + 2
on the refrigerant charge label supplied with the product.
The filled out label must be adhered in the proximity of the product charging port (e.g. onto the inside of the stop valve
cover).
6 5
NOTE:
National implementation of EU regulation on certain fluorinated greenhouse gases may require to provide the appropriate
official national language on the unit. Therefor an additional multilingual fluorinated greenhouse gases label is supplied
with the unit.
Sticking instructions are illustrated on the backside of that label.
CAUTION
Even though the stop valve is fully closed, the refrigerant may slowly leak out; do not leave the flare nut removed for a long
period of time.
8
2MXS52, 2AMX52, 3MXS40, 3MXS52, 3AMX52
(1)
GWP = global warming potential
1 factory refrigerant charge of the product: see unit name plate
4
2 additional refrigerant amount charged in the field
(Refer to the above information for the quantity of refrigerant
1
replenishment.)
2 3 total refrigerant charge
4 Contains fluorinated greenhouse gases covered by the Kyoto Protocol
5 outdoor unit
3
6 refrigerant cylinder and manifold for charging
Filling other cylinders
Turn the cylinder upside-down
when filling.
30m
■English