Table of Contents
Advertisement
The arrows on the display panel indicate which buttons are
used to change the settings. The settings are active without
acknowledgement and are displayed in the main menu.
²
– If the buttons are held down, the set values automatically run
through.
– The respective programme duration is displayed by selecting
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings/
options, foam detection, unbalanced load detection, the load
or soiling.
Ø
EcoPerfect:
For saving energy with a comparable washing effect to the
standard programme. When selected, the display lamp is lit.
Ø
SpeedPerfect:
For a shorter wash time with a comparable washing effect to
the standard programme. Observe maximum load. Refer
to ~ Page 23 When selected, the display lamp is lit.
²
Ø
²
(Options). Overview of all options
Select
60°C
Z
Rinse Plus
Water Plus
Rinse Hold
Ö
– Select option by pressing the two buttons displayed on the
left.
– Select/deselect option by pressing the two buttons
displayed on the right. The selected options are
immediately active.
In the case of multi-level settings keep touching the
buttons to run through the settings automatically.
– Wait or back to the main menu by pressing
button.
(Options) and e.g.
B
1400
Ö
Z
Water Plus buttons:
2:31h
on
Ö
Z
Â
Ö
²
(Options)
17
Advertisement
Table of Contents
