Automatic Programmes - Electrolux EBGL40 User Manual

12 www.electrolux.com
5. Use
DURATION.
If you touch
set the DURATION, the
appliance switches to the
setting of the END
function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display.
The appliance deactivates.
7. Touch a sensor field to stop the
acoustic signal.
8. Deactivate the appliance.
7.4 Setting the END
1. Activate the appliance and set an oven
function and temperature.
2. Touch
display shows
flashes in the display.
3. Use
to confirm. First you set the minutes
and then the hours.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the display.
The appliance deactivates.
4. Touch a sensor field to stop the
acoustic signal.
5. Deactivate the appliance.
7.5 Setting the MINUTE MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This

8. AUTOMATIC PROGRAMMES

WARNING!
Refer to Safety chapters.
There are 9 automatic programmes. The
display shows the default cooking times
for all automatic programmes. You can
find the recipes for the automatic
programmes in the "Recipe book".
8.1 Automatic programmes
1. Activate the appliance.
or to set the hours for
while you
again and again until the
.
or to set the END and
function has no effect on the operation of
the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
1. Touch
and "00" flash in the display.
2. Use
First you set the seconds, then the
minutes and the hours.
3. Use
MINDER and
4. Touch both
reset the set time.
5. Touch
starts automatically after five seconds.
When the set time ends, an acoustic
signal sounds for two minutes and 00:00
and flash in the display.
6. Touch a sensor field to stop the
acoustic signal.
7.6 Setting the Time delay
function
The DURATION
used at the same time, if the appliance is
symbol
to be switched on and off automatically
later. In this case, first set the DURATION
and then the END
"Setting the DURATION" and "Setting the
END" ).
2. Touch
The display shows the number of the
automatic programme (1 – 9).
3. Touch
automatic programme.
4. Touch
the appliance automatically starts to
work.
.
to switch between options.
or to set the MINUTE
to confirm.
and at once to
or the MINUTE MINDER
and END
function (refer to
.
or to choose the
or wait five seconds until
can be