Clock Functions - Electrolux EBGL40 User Manual

Hide thumbs Also See for EBGL40:
Table of Contents

Advertisement

3. Touch
automatically after five seconds.
If you activate the appliance
and do not set an oven
function or programme, the
appliance deactivates
automatically after 20
seconds.
6.4 Changing the temperature
Touch
temperature in steps of 5 °C.
When the appliance is at the set
temperature, an acoustic signal sounds
three times and the Heat up indicator
goes out.
6.5 Checking the temperature
You can see the temperature in the
appliance when the function or
programme operates.
1. Touch

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
7.2 Count Up Timer
The Count Up Timer is not
activated if Duration and End
are set.
The Count Up Timer starts to count when
the appliance starts to heat.
To reset the Count Up Timer, touch
and
at the same time until the display
shows "00:00" and the Count Up Timer
starts to count up again.
or the appliance starts
or
to change the
.
TIME OF DAY
DURATION
END
The Temperature / Time display shows the
temperature in the appliance.
2. Touch
temperature or the display shows it
automatically after five seconds.
6.6 Fast heat up function
The Fast heat up function is not available
with every oven function. An acoustic
signal sounds if the Fast heat up function
is not available for the set function if Faulty
tone is activated in the settings menu.
Refer to "Using the settings menu".
The Fast heat up function decreases the
heat up time.
To activate the Fast heat up function
touch and hold
seconds.
If you activate the Fast heat up function,
the bars on the display
one and
function operates.
Application
To show the time of day. To change the time of day,
refer to "Setting the time".
To set how long the appliance operates.
To set when the appliance deactivates. You can use
Duration and End at the same time (Time delay) if you
want the appliance to activate and deactivate automat-
ically later.
7.3 Setting the DURATION
1. Activate the appliance and set an oven
function and temperature.
2. Touch
display shows
flashes in the display.
3. Use
DURATION.
4. Touch
ENGLISH
to go back to the set
for more than three
flash one by
comes on to show that the
again and again until the
.
or
to set the minutes for
to confirm.
11

Advertisement

Table of Contents
loading

Table of Contents