Correcting Reduced Water Flow - Sprayheads - Kohler K-425 Homeowner's Manual

Correcting Reduced Water Flow - Sprayheads

If your sprayheads begin to show reduced flow or performance, follow these steps. If performance does not
improve, contact your local service representative.
Clean the Sprayhead Holes
With the water running, firmly rub the holes in the face of the sidespray to dislodge any mineral
build-up or debris. If this improves performance, discontinue servicing. If this does not improve
performance, continue to Clean/Replace the Screen.
Clean/Replace the Screen
Turn off the water.
Loosen the setscrew with a hex wrench.
Carefully remove the sidespray from the supply tube.
Remove the screen from inside the supply tube.
Clean or replace the screen as needed.
Insert the screen into the supply tube as shown.
Slide the sidespray over the supply tube.
Tighten the setscrew to secure the sidespray to the supply tube.
Kohler Co.
Screen
Supply
Tube
Setscrew
15
Sidespray
1000705-5-C