Table of Contents
Advertisement
4. Connect the Water Supply
Supply Stop
IMPORTANT! Risk of product damage. Align water inlet hose thread with cover
thread, do not damage threads or over tighten connector. To tighten the connector,
manually tighten and then tighten 1/4 turns more by tool.
IMPORTANT! Risk of product damage. Do not scratch the product surface.
Connect the T-valve directly to toilet water inlet port.
Note! For newly installed plumbing pipes, before connecting water inlet hose to
the T-valve, flush several seconds to remove the dirt and debris, etc inside the
hose.
Use supplied hose to connect Tee-valve to cover.
Note! use supplied new hose; do not reuse the old hose.
Connect T-valve to water supply system (valve shall be purchased by customer)
Turn on water supply system.
Note! Flush the water supply pipes completely to remove debris. The product
is designed for tap water. Make sure not to use industrial water, sewage water,
waste water and ocean water.
Check water leak, adjust if necessary.
Kohler Co.
T-valve
7
1361650-T01-B
Advertisement
Table of Contents
