System Bios; Power Supply - Acer Veriton M680G Service Manual

6 SATAII connectors.
•
Four 2*5 pin Intel FPIO specification USB pin connectors (follow Intel FPIO standard Specification).
•
One 2*5 pin Intel FPIO spec. Microphone In/ Headphone Out pin connectors.
•
One serial port 2*5 pin connector (COM2).
•
One 4 pin CPU Fan connector.
•
One 3 pin System Fan connector with linear circuit.
•
One 4 pin SPDIF header closed to PCIEx16 slot.
•
One 24 pin ATX interface PS3/PS2 SPS connector, 4 pin CPU power connector.
•
One 2*7 pin front panel IO header.
•
One Jumper for clear CMOS.
•
One on board buzzer.
•
One 2pin OBR connector.
•
Two reserve 2pinGPIO connector.
•
One 2pin Intrusion Alarm connector.
•
One LPT 2*13pin header (near rear IO is preferable).
•
One 2*4 pin internal speaker header.
•
Braidwood slot (reserved).
•
One 3pin ME enable/disable header.
•

System BIOS

Use SPI Flash
•
Size: 64Mb(Piketon vPro).
•
Kernel:AMI Kernel with Acer skin/copyright.
•

Power supply

300W/ in stable mode (Acer/GTW Assign System Power Unit).
•
Design for Intel Piketon chipset compatible system.
•
Voltage design should be covered +5V, +3.3V, +12V, +5VSB, -12V (attention to 12V output capability).
•
Demand for both PFC/Non-PFC solutions.
•
Minimum 4 Serial ATA power connector solution should be included (by default).
•
Minimum 1 big 4-pin power connector included.
•
Minimum 1 small 4-pin power connector included.
•
PFC version will not provide switch selector for 115/230V AC input but it should be universal for Europe
•
and China.
Non-PFC version should provide switch selector for 115/230V AC input and universal for worldwide.
•
PS2 style.
•
Compliant with Energy Star 5.0(Veriton M680 will not support Energy Star 5.0).
•
Should be compliant with Eup lot6.
•
4 Chapter 1