Supermicro MicroBlade MBI-6119G-C2 User Manual
  1. Manuals
  2. Brands
  3. Supermicro Manuals
  4. Control Unit
  5. MicroBlade MBI-6119G-C2
  6. User manual

Supermicro MicroBlade MBI-6119G-C2 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MBI-6119G-C2
MicroBlade™ Module
User's Manual
Revison 1.0b

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MicroBlade MBI-6119G-C2 and is the answer not in the manual?

Questions and answers

Related Manuals for Supermicro MicroBlade MBI-6119G-C2

Summary of Contents for Supermicro MicroBlade MBI-6119G-C2

  • Page 1 MBI-6119G-C2 MicroBlade™ Module User’s Manual Revison 1.0b...
  • Page 2 This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license.
  • Page 3 This manual is written for professional system integrators, Information Technology professionals, service personnel and technicians. It provides information for the installation and use of the Supermicro MBI-6119G-C2 and MBI-6119G-T4 MicroBlade modules. Installation and maintenance should be performed by experienced professionals only.
  • Page 4 MBI-6119G-C2 MicroBlade Modules User’s Manual Secure Data Deletion A secure data deletion tool designed to fully erase all data from storage devices can be found on our website: https://www.supermicro.com/about/policies/disclaimer.cfm?url=/ wftp/utility/Log9_Secure_Data_Deletion_Utility/...

  • Page 5: Table Of Contents

    Processors ....................1-2 Memory ....................1-2 Storage ....................1-3 RAID ....................... 1-3 Density ....................1-3 BMC Password ..................1-3 1-3 Contacting Supermicro ..............1-4 Chapter 2 Standardized Warning Statements ..... 2-1 2-1 About Standardized Warning Statements ........2-1 Warning Definition................... 2-1 Installation Instructions ................
  • Page 6 MBI-6119G-C2 MicroBlade Modules User’s Manual Installing the Processor(s) ..............3-4 Installing a Heatsink................3-6 Removing a Heatsink................3-7 3-5 Memory Installation ................3-8 Populating Memory Slots ................ 3-8 DIMM Installation ..................3-9 3-6 Hard Disk Drive Installation ............3-10 3-7 Installing the Operating System ............
  • Page 7 Appendix A AMI UEFI BIOS POST Codes ......A-1 A-1 Checkpoint Ranges ................A-1 A-2 Standard Checkpoints ..............A-2 A-3 OEM-Reserved Checkpoint Ranges ..........A-9...
  • Page 8 MBI-6119G-C2 MicroBlade Modules User’s Manual Notes viii...

  • Page 9: Chapter 1 Introduction

    • Supermicro product manuals: http://www.supermicro.com/support/manuals/ • Product drivers and utilities: ftp://ftp.supermicro.com • If you have any questions, please contact our support team at: support@supermicro.com Note: A complete list of safety warnings is provided on the Supermicro web site at http://www.supermicro.com/about/policies/safety_information.cfm.

  • Page 10: Blade Module Features

    E3-1200 v5 series processor in a H4 (LGA 1151) socket embedded in the motherboard. This system uses the Intel C236 chipset. Refer to the Supermicro web site for a complete listing of supported processors (http:// www.supermicro.com/products/microblade). Please note that you will need to check the detailed specifications of a particular blade module for a list of the CPUs it supports.

  • Page 11: Storage

    It can be found on a sticker on the blade service tab, and a sticker on the motherboard. The sticker also displays the BMC MAC address. For more information, refer to our website at https://www.supermicro.com/en/support/ BMC_Unique_Password. The service tab and an example sticker are illustrated below. Service Tab...

  • Page 12: Contacting Supermicro

    Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 marketing@supermicro.com (General Information) Email: support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML ‘s-Hertogenbosch, The Netherlands...

  • Page 13: Chapter 2 Standardized Warning Statements

    The following statements are industry standard warnings, provided to warn the user of situations which have the potential for bodily injury. Should you have questions or experience difficulty, contact Supermicro's Technical Support department for assistance. Only certified technicians should attempt to install or configure components.
  • Page 14 MBI-6119G-C2 MicroBlade Module User’s Manual Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut.

  • Page 15: Installation Instructions

    Chapter 2: Standardized Warning Statements 안전을 위한 주의사항 경고 ! 이 경고 기호는 위험이 있음을 알려 줍니다 . 작업자의 신체에 부상을 야기 할 수 있는 상태에 있게 됩니다 . 모든 장비에 대한 작업을 수행하기 전에 전기회로와 관련된 위험 요소들을 확인하시고 사전에 사고를 방지할 수 있도록 표준 작업절차를 준수해 주시기 바랍니다...

  • Page 16: Circuit Breaker

    MBI-6119G-C2 MicroBlade Module User’s Manual Attention Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation. ‫מתח‬ ‫את הוראות התקנה לפני חיבור המערכת למקור‬ ‫יש לקרוא‬ ‫ﻣﺼﺪر ﻟﻠﻄﺎﻗﺔ‬ ‫اﻟﻨﻈﺎم إﻟﻰ‬ ‫ﻗﺒﻞ ﺗﻮﺻﯿﻞ‬ ‫ﺘﺮﻛﯿﺐ‬ ‫اﻗﺮ إرﺷﺎدات اﻟ‬ 시스템을 전원에 연결하기 전에 설치 안내를 읽어주십시오 . Waarschuwing Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit.

  • Page 17: Power Disconnection Warning

    Chapter 2: Standardized Warning Statements ‫קצר חשמלי. יש לוודא כי‬ ‫המותקנת במבנים למניעת‬ ‫ה‬ ‫הגנ‬ ‫מוצר זה מסתמך על‬ ‫הוא לא יותר מ‬ ‫החשמלי‬ ‫המכשיר המגן מפני הקצר‬ 250 V, 20 A ‫ﻓﻲ‬ ‫اﻟﺘﻲ ﺗﻢ ﺗﺜﺒﯿﺘﮭﺎ‬ ‫ﻣﻦ اﻟﺪواﺋﺮاﻟﻘﺼﯿﺮة‬ ‫اﻟﺤﻤﺎﯾﺔ‬ ‫ﻣﻌﺪات‬ ‫ﯾﻌﺘﻤﺪ...

  • Page 18: Equipment Installation

    MBI-6119G-C2 MicroBlade Module User’s Manual ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasis para instalar o para quitar componentes de sistema. Attention Le système doit être débranché...

  • Page 19: Restricted Area

    Chapter 2: Standardized Warning Statements Warnung Das Installieren, Ersetzen oder Bedienen dieser Ausrüstung sollte nur geschultem, qualifiziertem Personal gestattet werden. ¡Advertencia! Solamente el personal calificado debe instalar, reemplazar o utilizar este equipo. Attention Il est vivement recommandé de confier l'installation, le remplacement et la maintenance de ces équipements à...
  • Page 20 MBI-6119G-C2 MicroBlade Module User’s Manual Warnung Diese Einheit ist zur Installation in Bereichen mit beschränktem Zutritt vorgesehen. Der Zutritt zu derartigen Bereichen ist nur mit einem Spezialwerkzeug, Schloss und Schlüssel oder einer sonstigen Sicherheitsvorkehrung möglich. ¡Advertencia! Esta unidad ha sido diseñada para instalación en áreas de acceso restringido. Sólo puede obtenerse acceso a una de estas áreas mediante la utilización de una herramienta especial, cerradura con llave u otro medio de seguridad.

  • Page 21: Battery Handling

    Chapter 2: Standardized Warning Statements Battery Handling Warning! There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. 電池の取り扱い...

  • Page 22: Redundant Power Supplies

    MBI-6119G-C2 MicroBlade Module User’s Manual ‫ﻓﻌﻠﯿﻚ‬ ‫ﺑﻄﺮﯾﻘﺔ ﻏﯿﺮ ﺻﺤﯿﺤﺔ‬ ‫اﻟﺒﻄﺎرﯾﺔ‬ ‫اﻧﻔﺠﺎر ﻓﻲ ﺣﺎﻟﺔ اﺳﺘﺒﺪال‬ ‫ﻣﻦ‬ ‫ھﻨﺎك ﺧﻄﺮ‬ ‫اﺳﺘﺒﺪال اﻟﺒﻄﺎرﯾﺔ‬ ‫ﺑﮫ اﻟﺸﺮﻛﺔ اﻟﻤﺼﻨﻌﺔ‬ ‫أوﺻﺖ‬ ‫ﻛﻤﺎ‬ ‫أو ﻣﺎ ﯾﻌﺎدﻟﮭﺎ‬ ‫ﺑﻨﻔﺲ اﻟﻨﻮع‬ ‫ﻓﻘﻂ‬ ‫ﺘﻌﻠﯿﻤﺎت اﻟﺸﺮﻛﺔ اﻟﺼﺎﻧﻌﺔ‬ ‫اﻟﻤﺴﺘﻌﻤﻠﺔ وﻓﻘﺎ ﻟ‬ ‫ﺗﺨﻠﺺ ﻣﻦ اﻟﺒﻄﺎرﯾﺎت‬ 경고 ! 배터리가...

  • Page 23: Backplane Voltage

    Chapter 2: Standardized Warning Statements ‫אם קיים יותר מספק אח ד ד‬ !‫אזהרה‬ ‫כל החיבורים על מנת לרוקן‬ ‫יש להסיר את‬ .‫ליחדה יש יותר מחיבור אחד של ספק‬ .‫דה‬ ‫י‬ ‫את היח‬ ‫اﻣﺪاد اﻟﻄﺎﻗﺔ‬ ‫ﺑﻮﺣﺪات‬ ‫ﻋﺪة اﺗﺼﺎﻻت‬ ‫ﺠﮭﺎز‬ ‫اﻟ‬ ‫ﯾﻜﻮن ﻟﮭﺬا‬ ‫ﻗﺪ‬...

  • Page 24: Comply With Local And National Electrical Codes

    MBI-6119G-C2 MicroBlade Module User’s Manual ‫מתח בפנל האחור י י‬ !‫הרה‬ ‫אז‬ ‫קיימת סכנת מתח בפנל האחורי בזמן תפעול המערכת. יש להיזהר במהלך‬ .‫העבודה‬ ‫اﻟﻠﻮﺣﺔ‬ ‫أواﻟﻄﺎﻗﺔ اﻟﻤﻮﺟﻮدة ﻋﻠﻰ‬ ‫اﻟﺘﯿﺎر اﻟﻜﮭﺮﺑﺎﺋﻲ‬ ‫ﻣﻦ‬ ‫ﺧﻄﺮ‬ ‫ھﻨﺎك‬ ‫ھﺬا اﻟﺠﮭﺎز‬ ‫ﺧﺪﻣﺔ‬ ‫ﻛﻦ ﺣﺬرا ﻋﻨﺪ‬ ‫ﯾﻌﻤﻞ‬ ‫اﻟﻨﻈﺎم‬...
  • Page 25 Chapter 2: Standardized Warning Statements ‫תיאום חוקי החשמל הארצי‬ !‫אזהרה‬ ‫הציוד חייבת להיות תואמת לחוקי החשמל המקומיים והארציים‬ ‫התקנת‬ ‫اﻟﻤﺘﻌﻠﻘﺔ‬ ‫اﻟﻤﺤﻠﯿﺔ واﻟﻮطﻨﯿﺔ‬ ‫ﻘﻮاﻧﯿﻦ‬ ‫ﯾﺠﺐ أن ﯾﻤﺘﺜﻞ ﻟﻠ‬ ‫اﻟﻜﮭﺮﺑﺎﺋﯿﺔ‬ ‫ﺗﺮﻛﯿﺐ اﻟﻤﻌﺪات‬ ‫ﺑﺎﻟﻜﮭﺮﺑﺎء‬ 2-13...

  • Page 26: Product Disposal

    MBI-6119G-C2 MicroBlade Module User’s Manual 경고 ! 현 지역 및 국가의 전기 규정에 따라 장비를 설치해야 합니다 . Waarschuwing Bij installatie van de apparatuur moet worden voldaan aan de lokale en nationale elektriciteitsvoorschriften. Product Disposal Warning! Ultimate disposal of this product should be handled according to all national laws and regulations.

  • Page 27: Hot Swap Fan Warning

    Chapter 2: Standardized Warning Statements 경고 ! 이 제품은 해당 국가의 관련 법규 및 규정에 따라 폐기되어야 합니다 . Waarschuwing De uiteindelijke verwijdering van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. Hot Swap Fan Warning Warning! The fans might still be turning when you remove the fan assembly from the chassis.

  • Page 28: Power Cable And Ac Adapter

    Electrical Appliance and Material Safety Law prohibits the use of UL or CSA -certified cables (that have UL/CSA shown on the code) for any other electrical devices than products designated by Supermicro only. 電源コードと AC アダプター...
  • Page 29 Fehlfunktion oder ein Brand entstehen. Elektrische Geräte und Material Safety Law verbietet die Verwendung von UL-oder CSA-zertifizierte Kabel, UL oder CSA auf der Code für alle anderen elektrischen Geräte als Produkte von Supermicro nur bezeichnet gezeigt haben.
  • Page 30 ‫ﻛﺎﺑﻼت‬ ‫اﺳﺘﺨﺪام أي‬ ‫أن‬ . ‫اﻟﺘﻲ‬ ‫ﻣﻊ اﻟﻤﻨﺘﺞ‬ ‫ﺗﻢ ﺗﻮﻓﯿﺮھﺎ ﻟﻚ‬ UL ‫ أو‬CSA ‫اﻟﻜﺎﺑﻼت‬ ‫ﯾﺤﻈﺮ اﺳﺘﺨﺪام‬ ‫اﻟﺴﻼﻣﺔ‬ ‫ﻗﺎﻧﻮن‬ ‫وﻣﻮاد‬ ‫اﻷﺟﮭﺰة اﻟﻜﮭﺮﺑﺎﺋﯿﺔ‬ ‫ﻣﻌﺘﻤﺪة ﻣﻦ ﻗﺒﻞ‬ ‫ﻣﻦ ﻗﺒﻞ‬ ‫اﻟﻤﻌﯿﻨﺔ‬ ‫اﻟﻤﻨﺘﺠﺎت‬ ‫ﻏﯿﺮ‬ ‫ﻛﮭﺮﺑﺎﺋﯿﺔ أﺧﺮى‬ ‫أﺟﮭﺰة‬ ‫ﻷي‬ Supermicro ‫ﻋﻼﻣﺔ‬ ‫اﻟﺘﻲ ﺗﺤﻤﻞ‬ (UL/CSA 2-18...
  • Page 31 Het gebruik van andere kabels en adapters kan leiden tot een storing of een brand. Elektrisch apparaat en veiligheidsinformatiebladen wet verbiedt het gebruik van UL of CSA gecertificeerde kabels die UL of CSA die op de code voor andere elektrische apparaten dan de producten die door Supermicro alleen. 2-19...
  • Page 32 MBI-6119G-C2 MicroBlade Module User’s Manual 2-20...

  • Page 33: Chapter 3 Setup And Installation

    Chapter 3 Setup and Installation Overview This chapter covers the setup and installation of the MicroBlade module and its components. Installing MicroBlade Modules Up to twenty-eight MBI-6119G-C2 MicroBlade modules may be installed into a single MBE-628E-xxx enclosure, or up to fourteen in a MBE-314E-xxx MicroBlade module enclosure.

  • Page 34: Removing A Microblade Module Unit From The Enclosure

    MBI-6119G-C2 MicroBlade Modules User’s Manual Removing a MicroBlade Module Unit from the Enclosure Although the MicroBlade module system may continue to run, individual MicroBlade modules should always be powered down before removing them from the enclosure. Removing a MicroBlade Module Unit from the Enclosure 1.

  • Page 35: Onboard Battery Installation

    Chapter 3: Setup and Installation Figure 3-1. Inserting a MicroBlade Module into the Enclosure Onboard Battery Installation A battery is included on the motherboard to supply certain volatile memory components with power when power has been removed from the MicroBlade module. If this battery dies, it must be replaced with an equivalent CR2032 Lithium 3V battery.

  • Page 36: Processor And Heatsink Installation

    CPU socket cap is in place and none of the socket pins are bent; otherwise, contact your retailer immediately. • Refer to the Supermicro website for updates on CPU support. Installing the Processor(s) Begin by removing power from the system.
  • Page 37 Chapter 3: Setup and Installation 2. Gently lift the load lever to open the load plate. Remove the plastic cover plate. Top Edge Bottom Edge 3. Use your thumb and your index finger to hold the edges of the processor. Align the CPU key (the semi-circle cutouts) with the socket keys.

  • Page 38: Installing A Heatsink

    MBI-6119G-C2 MicroBlade Modules User’s Manual Installing a Heatsink An active type heatsink is used on the motherboard. Note: You should apply thermal grease to the heatsink if it has not already been pre-applied. 1. Place the heatsink on top of the CPU so that the four mounting holes are aligned with those on the heatsink retention mechanism.

  • Page 39: Removing A Heatsink

    Chapter 3: Setup and Installation Removing a Heatsink We do not recommend removing the heatsink. If necessary, please follow the instructions below to prevent damage to the CPU or the CPU socket. 1. Unscrew and remove the heatsink screws from the motherboard in the sequence as show in the figure above.

  • Page 40: Memory Installation

    Super Micro authorized manufacturer due to compatibility issues. See details below on supported memory and our web site (http:// www.supermicro.com/products/microblade/ for recommended memory. Populating Memory Slots The mainboard of a MBI-6119G-C2 MicroBlade module has four (4) memory slots. For optimized memory bandwidth it is strongly recommended that ALL memory slots in this MicroBlade module be populated by DIMMs.

  • Page 41: Dimm Installation

    Chapter 3: Setup and Installation DIMM Installation Caution: Exercise extreme care when installing or removing DIMM modules to prevent any possible damage. Installing DIMM Memory Modules 1. Power down the blade module (see "Powering Down a MicroBlade Module Unit" on page 3-1).

  • Page 42: Hard Disk Drive Installation

    An operating system (OS) must be installed on each MicroBlade module. Blades with Microsoft Windows OS and blades with Linux OS can both occupy and operate within the same blade enclosure. Refer to the SuperMicro web site for a complete list of supported operating systems.

  • Page 43: Chapter 4 Microblade Module Features

    Chapter 4 MicroBlade Module Features Figure 4-1. MBI-6119G-C2 Blade Unit Front View This chapter describes the MBI-6119G-C2 MicroBlade module. Installation and maintenance should be performed by experienced technicians only. Figure 4-1 for a front view of the blade unit and Table 4-1 for its features.

  • Page 44: Control Panel

    MBI-6119G-C2 MicroBlade Modules User’s Manual Control Panel Each MicroBlade module has a similar control panel (Figure ) with power on/off button, reset button and LEDs on the front left side of the module. The numbers mentioned in Figure are described in Table 4-2.

  • Page 45: Power Button

    Chapter 4: MicroBlade Module Features Power Button Each MicroBlade module has its own power button so that individual blade units within the enclosure may be turned on or off independently of the others. Press the power button (#1) to turn on the blade server. The power LED (#3) will turn green. To turn off, press and hold the power button for >4 seconds and the power LED will turn orange.

  • Page 46: Motherboard

    MBI-6119G-C2 MicroBlade Modules User’s Manual Motherboard The motherboard of the MBI-6119G-C2 MicroBlade module unit is a proprietary design, which is based on the Intel Xeon E3-1200 v5 processor. See Figure 4-4 for a block diagram of this chipset, Figure 4-3 for a view of the B2SS1-CPU motherboard and Figure 4-5 for an exploded view diagram of the MicroBlade module unit.
  • Page 47 Chapter 4: MicroBlade Module Features Table 4-4. B2SS1-CPU Motherboard Layout Item Description Intel Xeon E3-1200 v5 processors embedded in a H4 (LGA 1151) socket DIMM slots for DIMM memory modules 2.5" HDD/SSD CMOS Clear SATA DOM Ports Battery...
  • Page 48 MBI-6119G-C2 MicroBlade Modules User’s Manual Figure 4-4. Intel B2SS1-CPU Block Diagram B2SS1-CPU SVID IMVP8 MISC VRs DDR4 (CHA) DIMM1 DIMM2(Far) 2133/1866/1600MHz DDR4 (CHB) DIMM1 DIMM2(Far) INTEL LGA1151 2133/1866/1600MHz (Socket-H4) PCIe2.0 x4 1000BASE-BX PCIe 3.0 X 8 I-350-AM2 1000BASE-X REALTEK RTL8211FS PCIe 1.0 X 1 USB 2.0 ASPEED...

  • Page 49: Jumpers

    Chapter 4: MicroBlade Module Features Jumpers Any jumpers present on the mainboard are used by the manufacturer only; there are no jumpers used to configure the operation of the mainboard by the user. CMOS Clear JBT1 is used to clear CMOS and will also clear any passwords. JBT1 consists of two contact pads located near the BIOS chip.

  • Page 50: Blade Unit Components

    MBI-6119G-C2 MicroBlade Modules User’s Manual Blade Unit Components Figure 4-5. Exploded View of a MBI-6119G-C2 MicroBlade Module Table 4-5. Main Components of a MBI-6119G-C2 Blade Module Item Description Blade Unit/Module 2.5" Hard Drives (1-4) DIMM slots (4) CPU/Heatsink Hard Drive Riser Card Hard Drive Backplane...

  • Page 51: Memory Support

    See Chapter 1 for information on RAID Setup. WARNING: Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers. For information on recommended HDDs, visit the Supermicro Web site http://www.supermicro.com/products/nfo/storage.cfm...
  • Page 52 MBI-6119G-C2 MicroBlade Modules User’s Manual Notes 4-10...

  • Page 53: Chapter 5 Bios

    Note: Due to periodic changes to the BIOS, some settings may have been added or deleted and might not yet be recorded in this manual. Please refer to the http:// www.supermicro.com/products/microblade/module/ web site for further details on BIOS setup and the BIOS menus for your MicroBlade module.

  • Page 54: Bios Updates

    However, it is recommended that you not update BIOS if you are not experiencing problems with a blade module. Updated BIOS files are located on our web site (http://www.supermicro.com/products/ microblade). Please check the current BIOS revision and make sure it is newer than the revision you have.

  • Page 55: Running Setup

    Chapter 5: BIOS Running Setup Note: Default settings are in bold text unless otherwise noted. The BIOS setup options described in this section are selected by choosing the appropriate text from the M BIOS S screen. All displayed text is described in this ETUP section, although the screen display is often all you need to understand how to set the options.

  • Page 56: Main Bios Setup

    MBI-6119G-C2 MicroBlade Modules User’s Manual Main BIOS Setup Figure 5-2. BIOS Setup Screen All Main Setup options are described in this section. Use the U arrow keys to move among the different settings in each menu. Use the L arrow keys to IGHT change the options for each setting.

  • Page 57: Advanced Setup

    Chapter 5: BIOS Advanced Setup Figure 5-3. Advanced Setup Screen Choose Advanced from the BIOS Setup Utility main menu with the arrow keys to display the A menu. The items with a triangle beside them are DVANCED ETUP sub-menus that can be accessed by highlighting the item and pressing <E >.
  • Page 58 MBI-6119G-C2 MicroBlade Modules User’s Manual Table 5-2 describes all sub-menus found in the A menu. DVANCED ETUP Table 5-2. Advanced Setup Menu Options Sub-menu Description Table 5-3 for a description of BIOS setup menu options in this Boot Feature sub-menu. Table 5-4 for a description of BIOS setup menu options in this CPU Configuration...
  • Page 59 Chapter 5: BIOS Table 5-3. Boot Feature Sub-menu (Continued) Menu Option Description Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup and allow the drives that are attached to INT19 Trap Response these host adaptors to function as bootable disks.
  • Page 60 MBI-6119G-C2 MicroBlade Modules User’s Manual Table 5-4. CPU Configuration Sub-menu (Continued) Menu Option Description This feature allows you to select the performance state that the BIOS will Boot Performance Mode set before OS handoff. Options include Power Saving, Max Non-Turbo Performance and Turbo Performance.
  • Page 61 Chapter 5: BIOS Table 5-4. CPU Configuration Sub-menu (Continued) Menu Option Description Use this feature to package a C-State Limit. Options include C0/C1, C2, Package C-State Limit C3, C6, C7, C7s, C8 and Auto. CPU Thermal This sub-menu allows you specify CPU Thermal Configuration options. Configuration When this feature is Disabled, the ACPI thermal management uses EC reported temperature values.
  • Page 62 MBI-6119G-C2 MicroBlade Modules User’s Manual Table 5-5. Chipset Configuration Sub-menu (Continued) Menu Option Description PEG Port This sub-menu displays options for PEG Port Configuration. Configuration PEG 0:1:0 (LSI SAS This shows static information for the LSI SAS 3008 system. 3008) PEG0 Enable Use this feature to Enable or Disable the PEG 0:1:0 Root Port.
  • Page 63 Chapter 5: BIOS Table 5-5. Chipset Configuration Sub-menu (Continued) Menu Option Description Energy Performance This feature Enables or Disables the Energy Performance Gain. Gain Memory Scrambler This feature Enables or Disables Memory Scrambler support. Fast Boot This feature Enables or Disables fast path through the MRC. Use this feature to select options for enabling or disabling refreshing 2X REFRESH_2X_ mode.
  • Page 64 MBI-6119G-C2 MicroBlade Modules User’s Manual Table 5-7. PCIe/PCI/PnP Configuration Sub-menu (Continued) Menu Option Description This setting Enables or Disables 64-bit capable devices to be decoded in Above 4G Decoding above 4G address space. This setting is only used if the system supports 64-bit PCI decoding.
  • Page 65 Chapter 5: BIOS Table 5-8. SuperIO Device Configuration Sub-menu (Continued) Menu Option Description This feature specifies the base I/O port address and the Interrupt Request address of a serial port specified by the user. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ address.
  • Page 66 MBI-6119G-C2 MicroBlade Modules User’s Manual Table 5-10. Serial Port Console Redirection Sub-menu (Continued) Menu Option Description Use this feature to set the data transmission size for Console Data Bits Redirection. The options are 7 Bits and 8 Bits. A parity bit can be sent along with regular data bits to detect data transmission errors.
  • Page 67 Chapter 5: BIOS Table 5-10. Serial Port Console Redirection Sub-menu (Continued) Menu Option Description This feature allows the user to select the target terminal emulation type for Console Redirection. Select VT100 to use the ASCII character set. Select VT100+ to add color and function key support. Select ANSI to Terminal Type use the extended ASCII character set.

  • Page 68: Event Logs Setup

    MBI-6119G-C2 MicroBlade Modules User’s Manual Event Logs Setup Table 5-13. Event Logs BIOS Setup Screen Table 5-14. Event Logs Menu Menu Option Description Change SMBIOS Event Use this sub-menu to change the SMBIOS Event Log configuration. Log Settings Change this item to enable or disable all features of the SMBIOS Event SMBIOS Event Log Logging during system boot.

  • Page 69: Ipmi Setup

    Chapter 5: BIOS Table 5-14. Event Logs Menu (Continued) Menu Option Description The Multiple Event Time Window (METW) defines number of minutes must METW pass between duplicate log events before MECI is incremented. This is in minutes, from 0 to 99. The default value is 60. View SMBIOS Event Log Use this sub-menu to view the SMBIOS Event Log records.
  • Page 70 MBI-6119G-C2 MicroBlade Modules User’s Manual Table 5-16. IPMI Menu (Continued) Menu Option Description Use this option to choose the reactions to a full SEL. Options include Do When SEL is Full Nothing or Erase Immediately. BMC Network Use this sub-menu to information and controls to configure BMC network Configuration parameters.

  • Page 71: Security

    Chapter 5: BIOS Security Table 5-17. Security BIOS Setup Screen Choose Security from the BIOS Setup main menu with the arrow keys to bring up the menu. Security setting options are displayed by highlighting the setting ECURITY ETUP using the arrow keys and pressing <E >.
  • Page 72 MBI-6119G-C2 MicroBlade Modules User’s Manual Table 5-18. Security Menu Options Menu Option Description This setting allows you to specify when the password is checked. Options specify when the setup should be done with Setup having the password Password Check checked when invoking setup, while Always checks the password while invoking setup as well as on each boot.

  • Page 73: Boot

    Chapter 5: BIOS Boot Table 5-19. Boot BIOS Setup Screen Choose Boot from the 128 Mb SPI Flash EEPROM with AMI® BIOS BIOS Setup Utility main menu with the arrow keys to bring up the B menu. Security setting ETUP options are displayed by highlighting the setting using the arrow keys and pressing <E >.

  • Page 74: 5-10 Save & Exit

    MBI-6119G-C2 MicroBlade Modules User’s Manual Table 5-20. Boot Setup Menu Options Menu Option Description This selects which boot device type to list in the FIXED BOOT ORDER Boot Mode Select Priorities of this menu. Options include LEGACY, UEFI and DUAL. Use these options to set what the boot priority order will be for various boot Fixed Boot Order Priorities devices in your system.
  • Page 75 Chapter 5: BIOS Choose S & E from the 128 Mb SPI Flash EEPROM with AMI® BIOS BIOS Setup Utility main menu with the arrow keys to display the S & E menu. All Exit ETUP BIOS settings are described in Table 5-22 below.
  • Page 76 MBI-6119G-C2 MicroBlade Modules User’s Manual Notes 5-24...

  • Page 77: Appendix Aami Uefi Bios Post Codes

    Appendix A AMI UEFI BIOS POST Codes A status code is a data value used to indicate progress during the boot phase. A subset of these status codes, known commonly as checkpoints, indicate common phases of the BIOS boot process. Checkpoints are typically output to I/O port 80h, but Aptio 4.x core can be configured to send status codes to a variety of sources.

  • Page 78: Standard Checkpoints

    MBI-6119G-C2 MicroBlade Modules User’s Manual Standard Checkpoints Table A-2. SEC Phase Codes Description Status Code 0x00 Not Used Progress Codes 0x01 Power on. Reset type detection (soft/hard). 0x02 AP initialization before microcode loading 0x03 North Bridge initialization before microcode loading 0x04 South Bridge initialization before microcode loading 0x05...
  • Page 79 Appendix A: AMI UEFI BIOS POST Codes Table A-3. PEI Phase Status Codes Description 0x19 Pre-memory South Bridge initialization is started 0x1A Pre-memory South Bridge initialization (South Bridge module specific) 0x1B Pre-memory South Bridge initialization (South Bridge module specific) 0x1C Pre-memory South Bridge initialization (South Bridge module specific) 0x1D –...
  • Page 80 MBI-6119G-C2 MicroBlade Modules User’s Manual Table A-3. PEI Phase Status Codes Description 0x53 Memory initialization error. No usable memory detected 0x54 Unspecified memory initialization error. 0x55 Memory not installed 0x56 Invalid CPU type or Speed 0x57 CPU mismatch 0x58 CPU self test failed or possible CPU cache error 0x59 CPU micro-code is not found or micro-code update is failed 0x5A...
  • Page 81 Appendix A: AMI UEFI BIOS POST Codes Table A-3. PEI Phase Status Codes Description 0xFA Invalid recovery capsule 0xFB – 0xFF Reserved for future AMI error codes Table A-4. PEI Beep Codes # of Beeps Description Memory not Installed Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found...
  • Page 82 MBI-6119G-C2 MicroBlade Modules User’s Manual Table A-5. DXE Phase Status Codes Description 0x70 South Bridge DXE initialization is started 0x71 South Bridge DXE SMM initialization is started 0x72 South Bridge devices initialization 0x73 South Bridge DXE Initialization (South Bridge module specific) 0x74 South Bridge DXE Initialization (South Bridge module specific) 0x75...
  • Page 83 Appendix A: AMI UEFI BIOS POST Codes Table A-5. DXE Phase Status Codes Description 0xA5 SCSI Reset 0xA6 SCSI Detect 0xA7 SCSI Enable 0xA8 Setup Verifying Password 0xA9 Start of Setup 0xAA Reserved for ASL (see ASL Status Codes section below) 0xAB Setup Input Wait 0xAC...
  • Page 84 MBI-6119G-C2 MicroBlade Modules User’s Manual Table A-5. DXE Phase Status Codes Description 0xDA Boot Option is failed (StartImage returned error) 0xDB Flash update is failed 0xDC Reset protocol is not available Table A-6. DXE Beep Codes # of Beeps Description Invalid password Some of the Architectural Protocols are not available No Console Output Devices are found...

  • Page 85: Oem-Reserved Checkpoint Ranges

    Appendix A: AMI UEFI BIOS POST Codes OEM-Reserved Checkpoint Ranges Table A-8. OEM-Reserved Checkpoint Ranges Status Codes Description 0x05 OEM SEC initialization before microcode loading 0x0A OEM SEC initialization after microcode loading 0x1D – 0x2A OEM pre-memory initialization codes 0x3F – 0x4E OEM PEI post memory initialization codes 0x80 –...
  • Page 86 MBI-6119G-C2 MicroBlade Modules User’s Manual Notes A-10...
  • Page 87 Disclaimer The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.
  • Page 88 MBI-6119G-C2 MicroBlade Modules User’s Manual MBI-6119G-C4...

Table of Contents