User Password
IMPORTANT:To show the "Set User Password":
1. Choose "Set Superviser Password" and press
2. Type the password and then press
3. Confirm the password, and then press
4. The screen as below with "Set User Password" enabled will be shown.
To set a password:
1.
At the prompt, type your password. Your password can be up to 8 alphanumeric characters. When you
type the characters, they appear as asterisks on the password screen box.
2.
After typing the password, press
3.
At the next prompt, re-type your password and press
password entry, the screen automatically reverts to the main screen.
To disable the password, press
confirming that the password has been disabled.
Chapter 2
e
.
e
.
e
.
e
when prompted to enter the password. The screen displays a message
e
.
e
again to confirm the new password. After the
56