Frequency Control - Acer Veriton 7600G Service Manual

Parameter
ACPI Functiont
ACPI Suspend Type
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Primary IDE 0*
Primary IDE 1*
Secondary IDE 0*
Secondary IDE 1*
FDD, COM, LPT port*
PCI PIRQ [A-D]#*
NOTE: These are global timer events.
The following table describes the parameters found in the sub-menu.

Frequency Control

Selecting " Frequency Control" from the Advanced Options menu displays the following screen:
Chapter 2
Description
ACPI power management
Selects the ACPI Suspend Type as S1&S3, S3 (STR,
Suspend to RAM) or S1 (POS, Power On Suspend)
Turn off the video by DPMS or Blank Screen or V/H SYNC
+ Blank Screen
Turn off the video when entering the Suspend mode.
When entering the Suspend mode, Stop Grant won't stop
CPU Clock, PwrOn (Power On) Suspend will.
This item lets you set an IRQ for the modem.
To enable or disable the detection of Primary IDE 0 (HDD)
activities for power down state transition.
To enable or disable the detection of Primary IDE 1 (HDD)
activities for power down state transition.
To enable or disable the detection of Secondary IDE 0
(HDD) activities for power down state transition.
To enable or disable the detection of Secondary IDE 1
(HDD) activities for power down state transition.
To enable or disable the detection of FDD, COM port, and
LPT port activities for power down state transition.
To enable or disable the detection of PCI PIRQ [A-D]#
activities for power down state transition.
Option
Enabled
Disabled
S1&S3
S3 (STR)
S1 (POS)
V/H SYNC+BLANK
Blank Screen
DPMS
Yes
No
Stop Grant
PwrOn Suspend
3, 4, 5, 7, 9, 10, 11, and N/A
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
66