Integrated Peripherals
The following table describes the parameters found in the sub-menu. Settings in boldface are the default and
suggested settings.
Parameter
AC97 Modem
UART Mode Select
UR2 Duplex Mode
TxD, RxD Polarity Active
Use IR Pins
Chapter 2
Description
Enabling the on-die AC97 MODEM if no add-on PCI
MODEM device.
Selects the UART as Serial Port (Normal) or IRDA or
ASKIR.
Selects the speed of UR2 Duplex Mode.
Selects the speed of TxD, RxD Polarity Active.
Use IR Pins as IR-Rx2Tx2 or RxD2, TxD2
Option
Auto
Disabled
Normal
IrDA
ASKIR
Half
Full
Lo, Hi
Lo, Lo
Hi, Lo
Hi, Hi
IR-Rx2Tx2
RxD2, TxD2
48