Burst Mode - Panasonic LUMIX DC-GF9 Operating Instructions For Advanced Features

5. 4K Photo and Drive Settings

Burst Mode

Setting the burst rate
∫
After pressing 3 in step
burst rate, and press [MENU/SET].
Burst speed
(pictures/
second)
Live View during Burst Mode
¢1
¢1 Number of recordable pictures
¢2 When recording is performed under the test conditions specified by Panasonic.
The burst speed will become slower halfway. However, pictures can be taken until the
capacity of the card becomes full. Depending on recording conditions, the number of burst
pictures that can be taken will be reduced.
• The burst speed may become slower depending on the following settings.
– [Picture Size] (P183)/[Quality] (P184)/[Sensitivity] (P113)/Focus Mode (P97)/[Focus/Release
Priority] (P202)
2
on P134, press 2/1 to select the
Electronic Front
Curtain
Electronic Shutter
With RAW files
Without RAW files
[H]
(High speed) (Middle speed)
5.8 (AFS) 4 (AFS)
5 (AFC) 5 (AFC)
10 (AFS) 4 (AFS)
6 (AFC) 6 (AFC)
None Available
15 or more
100 or more
135
H M L
LV LV
[M] [L]
(Low speed)
2
2
Available
2
¢
2
¢