Statistical Calculations - Canon F-715SA User Instructions

STATISTICAL CALCULATIONS

To enter the standard deviation mode by pressing
[SD] indicator lights up. If press
regression mode selection menu. [REG] indicator will be
turned on.
Before starting, be sure to clear the statistic memory by
pressing
Perform the data input .
In SD mode, store the displayed data by pressing
pressing
In REG mode, store the x-data and y-data in the form of:
x-data
data twice.
Use
For example in SD mode, the data 20 has 8 times will
press 20
Each time you press
of data input up to that point is indicated on the display
once (n = the number of input data).
Press
data value (x) and data frequency (Freq). Follow with the
above example, press
will display [Freq1= 8].
will input the same data twice.
y-data
for same data multiple entries.
8
or key during or after data input can display the
.
, pressing
.
to register the input, the number
will display [x1 = 20], and press
27
[SD] [REG]
, you can enter the
will input the same
,
,