Table of Contents
Advertisement
BEFORE USING THE MACHINE
TURNING ON THE POWER
This section describes how to turn on/off the machine's power and how to restart the machine.
Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the
[Power] button on the operation panel.
Turning on the power
• Turn the main power switch to the "
• When the main power indicator lights in green, press
the [Power] button.
Turning off the power
• Turn off the power by pressing the [Power] button,
then turn the main power switch to the "
Restart the machine
• Turn off the power by pressing the [Power] button and
then press it again to turn on the power.
• When turning off the main power switch, press the [Power] button on the operation panel and then turn the main power
switch to the "
" position.
In a sudden case of main power outage, turn the power for the machine back on and then turn it off in the correct order.
If the machine is left for a long time with the main power having been turned off prior to the [Power] button being turned off,
abnormal noises, degraded image quality or other problems may result.
• Turn off both the [Power] button and the main power switch and unplug the power cord if you suspect a machine failure, if
there is a bad thunderstorm nearby, or when you are moving the machine.
• When using the fax or Internet fax function, always keep the main power switch in the "
• In order for some settings to take effect, the machine must be restarted. In some states of the machine, restarting with the
[Power] button may not make the settings take effect. In this case, turn off the main power switch and then turn it on again.
MOTION SENSOR
(MX-3060V/3070V/3560V/3570V/4060V/4070V/5070V/6070V only)
This sensor detects the presence of a person that approaches the machine, and automatically wakes the machine from
sleep mode (Motion Sensor Mode Only).
Three settings are available for the detection range (
• The motion sensor detects the movement of sources of heat.
• The detection range may vary depending on the installation site and environment (ambient temperature, etc.).
12
" position.
" position.
Motion sensor
Far
Near
Main power switch
/
/
).
Detection range
Main power
indicator
" position.
Approx.
maximum
1.5 m
60 degrees
[Power]
button
Hide quick links:
Advertisement
Table of Contents
