100%
ethanol
2. The cleaning process is described as following,
Printer Part
Print Head
Platen Roller
Tear Bar/Peel Bar
Sensor
Exterior
Interior
Note:
Do not touch printer head by hand. If you touch it careless, please use ethanol to clean it.
Please use 100% Ethenol. DO NOT use medical alcohol, which may damage the printer head.
Regularly clean the print head and supply sensors once change a new ribbon to keep printer
performance and extend printer life.
Revise History
Date
Method
1. Always turn off the printer before
cleaning the print head.
2. Allow the print head to cool for a
minimum of one minute.
3. Use a cotton swab and 100%
ethanol to clean the print head
surface.
1. Turn the power off.
2. Rotate the platen roller and wipe it
thoroughly with 100% ethanol and
a cotton swab, or lint-free cloth.
Use the lint-free cloth with 100%
ethanol to wipe it.
Compressed air or vacuum
Wipe it with water-dampened cloth
Brush or vacuum
Clean the print head when changing a
new label roll.
Clean the platen roller when changing a
new label roll.
As needed
Monthly
As needed
As needed
Content
27
Interval
Editor