zenpert 4T520 Series User Manual page 21


Self-test
Printer will print the printer configuration after
printout can be used to check if there is any dot damage on the heater element, printer
configurations and available memory space.
Self-test printout
gap/black mark sensor calibration. Self-test
Model name
F/W version
Firmware checksum
Printer S/N
zenpert configuration file
System date
System time
Printed mileage (meter)
Cutting counter
Print speed (inch/sec)
Print darkness
Label size (inch)
Gap distance (inch)
Gap/black mark sensor intension
Code page
Country code
ZPL setting information
Print darkness
Print speed (inch/sec)
Label size
Control prefix
Format prefix
Delimiter prefix
Printer power up motion
Printer head close motion
Note:
ZPL is emulating for Zebra
language.
17
®