zenpert 4T520 Series User Manual page 3

Agency Compliance and Approvals
GB 4943.1
GB 9254, Class A
GB 17625.1
此为 A 级产品，在生活环境中，该产品可能会造成无线电干扰，在这种情况
下，可能需要用户对干扰采取切实可行的措施。
IS 13252(Part 1)/
IEC 60950-1
KN 32
KN 35
Important safety instructions:
1. Read all of these instructions and keep them for later use.
2. Follow all warnings and instructions on the product.
3. Disconnect the power plug from the AC outlet before cleaning or if fault happened.
Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.
4. The mains socket shall be installed near the equipment and easily accessible.
5. The unit must be protected against moisture.
6. Ensure the stability when installing the device, Tipping or dropping could cause damage.
7. Make sure to follow the correct power rating and power type indicated on marking label
provided by manufacture.
8. Please refer to user manual for maximum operation ambient temperature.
WARNING:
Moving parts. Keep finger or body away from moving parts.
Caution:
The printhead may be hot and could cause severe burns. Allow the
printhead to cool.
WARNING:
Remove the power from AC inlet before opening the media cover for cleaning or repairing
faults. After cleaning or fixing faults, media cover closing before power connecting to AC
inlet.
iii