Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Triangle Cadet
Elongated and Round Front
Models 216AD, 216BD Series
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read
these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
!
NOTE: Pictures may not exactly define contour of china and components.
TANK 4189D
BOWL 3517A ELONGATED
BOWL 3517B ROUND FRONT
Wax Ring
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A S A m e r i c a , I n c .
© A S A m e r i c a , I n c . 2 0 1 3
®
PRO 2-piece Toilet
SOLD SEPARATELY
EZ-INSTALL KIT INCLUDED WITH TANK
Attachment Handles
Tank To Bowl Gasket
EZ-INSTALL KIT INCLUDED WITH BOWL
T-Bolts with
Retainer (2)
Also includes Standard Bolt Caps (2)
Water Supply Line
Plastic Washers (2)
with Nuts (2)
Bolt Caps (2)
Bowl-To-Floor
Knobs (2)
Slow Close Toilet Seat
73 019 48 - 10 0
Advertisement
Related Manuals for American Standard Triangle Cadet PRO 216AD Series
Summary of Contents for American Standard Triangle Cadet PRO 216AD Series
- Page 1 Models 216AD, 216BD Series Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
- Page 2 ROUGHING-IN DIMENSIONS: NOTE: Distance from wall to closet flange centerline must be as shown below. Elongated Model 216AD Series Round Front Model 216BD Series 492mm (19-3/8") 492mm (19-3/8") 82mm 82mm (3-1/4") (3-1/4") FINISHED FINISHED FINISHED FINISHED WALL WALL WALL WALL 815mm 815mm (32-1/16")
- Page 3 Apply weight evenly. Hand tighten Do not move after only. Do not overtighten. placement. Water tight seal may break. NOTE: 1/4" EZ-BOLT AND CAP SHOWN. IF 5/16" BOLT USE STANDARD DISK AND CAP INCLUDED. Tighten handles alternately until the tank contacts the front and back of the bowl achieving china-to-china...
- Page 4 WARNING: Do not use in-tank cleaners. These products can seriously corrode fittings in the tank. This damage can cause leakage and property damage. American Standard shall not be responsible or liable for any damage caused by the use of in-tank cleaners.