Storage; Warning - Pinnacle International REMINGTON HH-150T-DFV User's Manual & Operating Instructions

Table of Contents

Advertisement

Available languages

Available languages

Long Term Storage:
1. Drain fuel through the drain plug in the bottom
of the fuel tank.
2. To remove the drain plug, pull the plug grip
downward and remove the seal head from the
drain hole in the tank. (See Figure 5)
Drain Plug
Figure 5
3. Using a small amount of kerosene, rinse and
swirl the kerosene inside of the fuel tank,
empty the tank fully.
4. To replace the drain plug; push the drain head
fully into the drain hole and secure by pushing
the seal cap fully into the head hole.
(See Figure 6)
Figure 6
IMPORTANT: Never store leftover kerosene between
seasons, using old fuel can damage heater.
© 2015, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
Maintenance
Drain Plug Grip
(Pull Down)
Drain Plug
Fuel Tank
Seal Head
Head Flange
Seal Cap
8
Service:
Never service heater while it is

WARNING

plugged in or hot!
DO NOT TAMPER WITH THE UNIT. HAVE
A COMPETENT SERVICEMAN MAKE ANY
NECESSARY ADJUSTMENT OR REPAIRS.
Use only original equipment parts. The use of
alternate or third party components can cause unsafe
operating conditions and will void your warranty.
TIP: To order OEM parts call (800)-641-6996
We suggest following a maintenance schedule as follows:
FUEL / FUEL TANK:
Flush tank every 200 hours of operation or as needed.
TIP: Follow the long term storage
instructions to flush the tank.
DO NOT flush with water, use fresh 1-K kerosene only.
Dual Fusion Forced Air Heater User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Remington hh-220t-dfv

Table of Contents