Shark Navigator Powered Lift-Away NV580 Series Instructions Manual page 23

STEP 2
2 Pull up to expose the
airway. Shine a flashlight
from the bottom to check
for possible blockage in
the airway.
STEP 3
3 Remove any string, carpet
fibers or hair that may be
wrapped around the brush
roll. There is a groove on the
brush bar that allows a pair
of scissors to cut across it
to loosen up the debris.
STEP 4
4 To reassemble, replace
base by lining it up along
the front of the nozzle.
Rotate closed and lock
the 2 locks.
s h a r kc l e a n . c o m
22