Chapter 2 System Utilities - Acer Aspire L350 Service Manual

System Utilities
BIOS (Basic Input and Output System) includes a CMOS SETUP utility which allows user to configure required
setting or to active certain system features.
The CMOS SETUP saves the configuration in the CMOS SRAM of the mainboard. When the power is turned
off, the battery on the mainboard supplies the necessary power to the CMOS SRAM.
Press <Del> button when the system is turned to enter Setup. As you press the <Del> button during BIOS
POST (Power-On Self Test), it will take you to the CMOS SETUP screen.
Press <F12> you can then enter BIOS Boot Menu to select your boot up device.
When setting up BIOS for the first time, it is recommended that you save the current BIOS to a disk in the
event that BIOS needs to be reset to its original settings.
BIOS is a Window s-based utility that doesn't required users to boot to DOS before upgrading BIOS but
directly download and update BIOS from the Internet.
Control Keys
Item
wxyz
e
^
{
}
l
m
p
r
t
u
NOTE: Main Menu: This is the online description of the highlighted setup functions is displayed at the bottom
of the screen.
NOTE: Status Page Setup Menu/ Option Page Setup Menu: Press F1 to pop up a small help window that
describes the appropriate keys to use and the possible selections for the highlighted item. To exit the
Help Window press <Esc>.
Chapter 2
Move to selection
Select Item
Main Menu: Quit and not save changes into CMOS Status Page Setup
Menu and Option Page Setup Menu, Exit current page and return to
Main Menu.
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page Setup Menu
Item Help
Restore the previous CMOS value from CMOS, only for option Page Setup
Menu
Load the Optimized Defaults
System Information
Save all the CMOS changes, only for Main Menu
Description
Chapter 2
21