Table of Contents
Advertisement
Understanding
Safety-Alert
Messages
Following Safety
Instructions
Replacement
Instructions
and Labels
Several types of safety-alert messages may appear throughout this instruction sheet and
on labels and tags attached to the S&C Scada-Mate SD Switching System. Familiarize
yourself with these types of messages and the importance of these various signal words:
"DANGER" identifies the most serious and immediate hazards that will likely
result in serious personal injury or death if instructions, including recommended
precautions, are not followed .
"WARNING" identifies hazards or unsafe practices that can result in serious
personal injury or death if instructions, including recommended precautions, are
not followed .
"CAUTION" identifies hazards or unsafe practices that can result in minor personal
injury if instructions, including recommended precautions, are not followed .
"NOTICE" identifies important procedures or requirements that can result in
product or property damage if instructions are not followed ."
If you do not understand any portion of this instruction sheet and need assistance, contact
your nearest S&C Sales Office or S&C Authorized Distributor. Their telephone numbers
are listed on S&C's website sandc.com, or call the S&C Global Monitoring and Support
Center at 1-888-762-1100.
Read this instruction sheet thoroughly and carefully
before installing your S&C Scada-Mate SD Switching
System .
If you need additional copies of this instruction sheet, contact your nearest S&C Sales
Office, S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment be replaced
immediately. Replacement labels are available by contacting your nearest S&C Sales
Office, S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.
Safety Information
DANGER
WARNING
CAUTION
NOTICE
NOTICE
S&C Instruction Sheet 775-510
3
Advertisement
Table of Contents
Need help?
Do you have a question about the Scada-Mate SD and is the answer not in the manual?