Nisuta NS-KVMUV8 User Manual page 33

NS-KVMUV8 / NS-KVMUV16 User Manual
(Continued from previous page.)
Setting
SCAN–SKIP
MODE
SCREEN
BLANKER
HOTKEY
COMMAND
MODE
HOTKEY
OSD
LANGUAGE
24
Selects which computers will be accessed under skip mode (see
F5 SKP, page 28), and Auto Scan mode (see F7 SCAN, page 29.
Choices are:
ALL - All the ports which have been set accessible (see SET
ACCESSIBLE PORTS, page 25);
QUICK VIEW - Only those ports which have been set accessible
and have been selected as quick view ports (see SET QUICK
VIEW PORTS, page 27);
POWERED ON - Only those ports which have been set accessible
and are powered on;
QUICK VIEW + POWERED ON - Only those ports which have
been set accessible and have been selected as quick view ports
and are powered on. The default is ALL.
Note: The quick view choices only show up on the administrator's
screen, since only he has Quick View setting rights (see SET
QUICK VIEW PORTS, page 27, for details).
If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1–30
minutes, then press [Enter]. The default setting of 0 disables this
function.
Enables / disables the hotkey command function in case a conflict
with programs running on the computers occurs.
Sets the keyboard shortcut for invoking Hotkey Mode (see
page 31). Choices are: NUM LOCK + - (minus) (default), and
CTRL + F12.
Sets the language used in the OSD. Choices are: English (default),
German, Japanese, Simplified Chinese and Traditional Chinese.
Function