Stacking And Rack Mounting; Stacking - Nisuta NS-KVMUV8 User Manual

NS-KVMUV8 / NS-KVMUV16 User Manual

Stacking and Rack Mounting

The NS-KVMUV8 / NS-KVMUV16 can be stacked on a desktop or rack
mounted in 1U of rack space. The procedures are desc ribed in the following
sections.
Note: 1. Allow at least 5.1 cm on each side for adequate ventilation and
12.7 cm at the rear for power cord and cable clearance.
2. The rack mount kit does not include cage nuts. If you need additional
screws or cage nuts, contact your rack dealer.
3. For instructional purposes, the NS-KVMUV16 is pictured in the diagrams
that follow. However, the NS-KVMUV8 is the same as the NS-KVMUV16,
except that it has 8 KVM ports instead of 16.

Stacking

The KVMUV8 / NS-KVMUV16 can be placed on any level surface that can safely
support its weight and the weight of the attached cables. Ensure that the surface
is clean and free of materials that can block the exhaust vents or otherwise
interfere with normal operation of the KVM switch. Peel the protective backing
off of the foot pads, and affix them to the bottom panel of the KVMUV8 / NS-KVMUV16
at the corners, as shown in the diagram below.
8