Setting The Time - Citizen 6S10 Manual

2. Separated Parts
3. Others
* Measurement of time rate
The unit(gate) time of measurement must be set at "10 sec." or integer fold value of 10 sec. Owing to
the DFC system, and the measurement must be performed in the form of complete watch.
* Marking on movement
* Typical clearance
Mov't - Caseback
Top of hands - Glass
* subject to the glass, case structure, and the length of hand
4. Instruction Manual
【Displays and Buttons】
Chronograph
second hand
Chronograph
minute hand
Second hand
A) SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
Setting stem
JAPAN
MIYOTA CO.
( CAL. NO.)
NO JEWELS
minimum 150 microns
300 - 400 microns *
065-A13
Button "A"
Chronograph
1/20 sec. hand
Normal
1st
Button "B"
2nd
Date