Page 1
Cal. 6S50 Instruction manual FUNCTION: CHRONOGRAPH TIMING UP TO 59 MINUTES 59 SECONDS. (CENTER SECOND HAND, 1/20 SEC SMALL HAND, MINUTE HAND) A) DISPLAYS AND BUTTONS B) SETTING THE TIME C) SETTING THE DATE D) USING THE CHRONOGRAPH E) CHRONOGRAPH RESET (INC. AFTER REPLACING BATTERY)
Page 2
C) SETTING THE DATE 1. Pull the crown out to the 1st Click Position. 2. Turn the crown clockwise to set the date. * If the date is set between the hours of around 9:00 PM and 3:00 AM, the date may not change on the following day. 3.
Page 3
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure shoud be performed when the chronograph second hand does not return to the Zero position. 1. Pull the crown out to the 2nd Click Position. 2. Press the button "A" once to set the chronograph second hand to the Zero position. 3.
Need help?
Do you have a question about the 6S50 and is the answer not in the manual?
Questions and answers