Table of Contents
Advertisement
STARTING A PROGRAMME WITHOUT THE
DELAY START
Press the button
.
•
The indicator of the button
flash and stays on.
•
The programme starts, the door locks, the
indicator
•
The programme time decreases with steps
of one minute.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
STARTING A PROGRAMME WITH THE DELAY
START OPTION
1. Press the button Delay Start
again until the display shows the delay you
want to set. The delay start indicator comes on.
2. Press the button Start/Pause
•
The door is locked and the indicator
on.
•
The appliance starts the countdown.
•
When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the Delay Start
press the button Start/Pause
After pressing the button Start/Pause
you can only cancel the Start/
Pause option.
To cancel the Delay Start
a. Press the button Start/Pause
the appliance to pause. The indicator of
button
flashes.
b. Press the button Delay Start
display shows
Press the Start/Pause button
start the programme immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before the
programme carries them out.
1. Press the Start/Pause
the running programme.
The related indicator flashes.
stops to
is on.
again and
:
option before you
.
option:
to set
until the
.
again to
button to interrupt
2. Change the options.
3. Press the Start/Pause
The programme continues.
CANCELLING A RUNNING PROGRAMME
1. Turn the programme knob to position
cancel the programme and to deactivate the
appliance.
2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. in
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
OPENING THE DOOR WHEN THE DELAY
START OPERATES
While the delay start operates, the appliance door
is locked and the display shows the indicator
is
1. Press Start/Pause
2. Wait until the door lock indicator
3. Open the door.
4. Close the door.
5. Press Start/Pause
The delay start continues to operate.
OPENING THE DOOR WHEN THE
PROGRAMME OPERATES
While the programme operates, the appliance door
is locked and the indicator
CAUTION! If the temperature and
level of the water in the drum are too
high, you cannot open the door.
1. Turn the programme knob to position
deactivate the appliance.
2. Wait some minutes until the indicator
off and then open carefully the appliance door.
3. Close the appliance door.
4. Set the programme again.
AT THE END OF THE PROGRAMME
•
The appliance stops automatically.
•
The acoustic signal operates (if it is activated).
•
In the display three flashing zeros come on.
•
The indicator of the Start/Pause
•
The door lock indicator
button again.
to
to pause the appliance.
goes off.
again.
appears.
to
goes
goes off.
goes off.
.
13
Advertisement
Table of Contents
