Advertisement
III. OPERATION INSTRUCTIONS
Put the pot on the ceramic plate
Make sure the air vents are not blocked and keep utensils
away from the immediate surrounds of the ceramic plate.
Make sure the cookware which has food or liquid is
placed in the center of ceramic plate.
Plug in
After the power supply is connected, the buzzer sounds.
The display shows "L", indicating that the induction
cooker is in standby mode.
Turn on
After pressing the "ON/STANDBY" button, the induction
cooker is ready for heating. Press the function button to
start heating.
After pressing the "ON/STANDBY" button, if no function
button is pressed for 10 seconds, the induction cooker
will switch off automatically.
Under the working mode, if there is no proper pot on the
ceramic plate, the induction cooker will not heat up and
the alarm will sound to indicate that a pot is required. One
minute later, it will switch off automatically.
Function
Power function
In order to select the power intensity you can:
- Either press the "+/-" buttons.
- Or select to the slider, by swiping your finger from left to
right on the button.
To guide you, lights appear above each level.
7
Advertisement
