Advertisement
II.PRODUCT INTRODUCTION
Before using New Induction cooker
Read this guide, taking special
Warnings" section.
Remove any protective film that may still be on your
ceramic plate.
Using the Touch Controls
The controls respond to touch, so you don't need to apply
any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that
there is no object (e.g. a utensil or a cloth) covering them.
Even a thin film of water may make the controls difficult to
operate.
III. OPERATION INSTRUCTIONS
Put the pot on the ceramic plate
Make sure the air vents are not blocked and keep utensils
away from the immediate surrounds of the ceramic plate.
Make sure the cookware which has food or liquid is
placed in the center of ceramic plate.
Plug in
After the power supply is connected, the buzzer sounds.
The display
cooker is in standby mode.
shows "L", indicating
note of the "Safety
that the induction
9
Advertisement
