Replacing The Oven Light Bulb - Asko OCS8487S Instructions For Use Manual

Hide thumbs Also See for OCS8487S:
Table of Contents

Advertisement

CLEANING

Replacing the oven light bulb

EN 40
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
The lamp is a consumer item and therefore not covered by warranty.
Replace the defective lamp with a lamp of the same type.
• Disconnect the appliance from the power supply by removing the
plug from the socket or by switching off the circuit breaker in the
fuse box.
• Please note: the light bulb can be very hot! Use protection to
remove the bulb.
1. Remove the four screws from the cover panel. Remove the cover
panel, the glass and the sealing ring.
2. Remove the faulty halogen lamp and replace it with a new one.
3. Replace the cover panel, the glass and the sealing ring.
Attention: The sealing ring needs to fit perfectly in the oven wall
recess.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents