Removing The Keyboard/Lcd Module; Removing The Keyboard; Removing The Lcd Module - Acer TravelMate 290 Service Manual

Removing the Keyboard/LCD Module

Removing the Keyboard

1. Use a plastic flat head screw driver or any plastic tool to detach the middle cover carefully.
2. Then remove the middle cover from the main unit.
3. Remove the two screws holding the keyboard.
4. Turn the keyboard over as the picture shows.
5. Disconnect the keyboard cable then remove the keyboard.

Removing the LCD module

1. Remove the middle cover. See step 1 and step 2 on "Removing the Keyboard" section.
2. Remove one screw as the picture shows.
3. Then disconnecto the LCD coaxial cable.
4. Remove the six screws on the rear and the bottom panel; three on each side.
5. Then detach the entire LCD module.
Chapter 3 49