Disassembling The Lcd Module - Acer TravelMate 290 Service Manual

Hide thumbs Also See for TravelMate 290:
Table of Contents

Advertisement

Disassembling the LCD Module

1.
Remove the two LCD rubber feet and the two screw caps.
2.
Remove the four screws that fasten the LCD bezel.
3.
Detach the LCD bezel carefully.
4.
Tear off the tape fastening the inverter connector.
5.
Tear off the tape fastening the inverter cable.
6.
Remove the screw holding the LCD inverter board.
7.
Disconnect the high voltage cable and the inverter board.
8.
Disconnect the inverter board connector.
9.
Remove the two screws holding the LCD; one on each side.
10. Then remove the LCD from the LCD panel.
.
Chapter 3
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Travelmate 290 series

Table of Contents