Related Manuals for ETEKCITY Apex EFS-A591S-KUS
Summary of Contents for ETEKCITY Apex EFS-A591S-KUS
- Page 1 Apex HR Smart Fitness Scale ™ Model: EFS-A591S-KUS User Manual Questions or Concerns? Mon–Fri, 9:00 am–5:00 pm PST/PDT support@etekcity.com • (855) 686-3835...
- Page 2 Thank you for purchasing the Apex HR Smart Fitness Scale ™ by Etekcity. If you have any questions or concerns, please reach out to our helpful Customer Support Team at support@etekcity.com. We hope you enjoy your new scale!
-
Page 3: Table Of Contents
Table of Contents Package Contents Safety Information Function Diagram Display Diagram VeSync App Setup Using the Smart Scale Maintenance Troubleshooting Warranty Information Customer Support... -
Page 4: Package Contents
Package Contents 1 x Apex™ HR Smart Fitness Scale 1 x USB Type-C Charging Cable 1 x Quick Start Guide Weight Capacity 400 lb / 180 kg / 28 st Increments 0.1 lb / 0.05 kg Weight Units lb / kg / st Platform Tempered Glass Battery... -
Page 5: Safety Information
READ AND SAVE THESE INSTRUCTIONS Safety Information Please read and follow all instructions and safety guidelines in this manual. Medical • This scale should not be used to diagnose or treat any medical condition. • Scale data should not be used as a substitute for medical advice from a healthcare professional. - Page 6 General Use • Check the scale before using. Do not use the scale if it is damaged in any way. • Do not strike or bang on the scale. • Do not use the scale if there is a crack on the glass. While tempered glass is stronger and fractures more safely than ordinary glass, it may shatter unexpectedly after developing a slight crack.
- Page 7 • Keep the scale in a cool area with low humidity. • Keep the scale away from heat sources, such as ovens or heaters. • Store the scale in a horizontal position, not a vertical position. • This scale is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a...
-
Page 8: Function Diagram
Function Diagram Conductive Areas Reset Button Display USB Charging Socket Weighing Platform Anti-Skid Padding... -
Page 9: Display Diagram
Display Diagram Bluetooth Icon ® Wi-Fi Icon ® Zero-Current Mode Baby Mode Battery Indicator 4 Corners Stability Indicator Weight Unit Weight Measurement... -
Page 10: Vesync App Setup
VeSync App Setup Note: The VeSync app is continually being improved and may change over time. If there are any differences, follow the in-app instructions. To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store or Google Play Store. - Page 11 Make sure your phone has Bluetooth turned on. ® scale. Note: You can change the name and icon at any time in the smart...
- Page 12 Creating a User Important: Entering inaccurate information will make the scale’s measurements less accurate. If you are a new user, you will need to enter physical information your body metrics. Follow the in-app instructions to create a user Note: If you don’t identify with the available gender options (or are unsure) pick the option that you think best physically matches you.
-
Page 13: Using The Smart Scale
Using the Smart Scale Note: • Placing the scale on soft surfaces such as shaggy carpet may cause inaccurate measurements or tipping. • 0.4 inches / 10 mm or less. Step on the scale, then step off. Wait for the screen to display “0.0”... - Page 14 Weighing Modes • Zero-Current Mode: Turn off the scale’s electrical current and only provide measurements for weight and BMI. This mode can be helpful for users who are pregnant or who have implanted medical devices, such as pacemakers. • Baby Mode: To measure your baby or pet, turn on this mode and follow the in-app instructions for weighing.
-
Page 15: Maintenance
Maintenance Clearing the Smart Scale cleared to ensure accurate results. Step on the scale until digits appear on the display, then step off. [Figure 1.1] The scale will show “C” while clearing, then “0.00” when ready [Figure 1.2]. [Figure 1.1] [Figure 1.2]... - Page 16 Cleaning the Smart Scale • Use a slightly damp cloth to clean the surface of the scale, followed by a soft, dry cloth to wipe away any remaining moisture. • Do not use chemical or abrasive cleaning agents to clean the scale.
-
Page 17: Troubleshooting
Troubleshooting The scale doesn’t turn on. • The scale may need to be charged. Plug it in and charge for 3 hours. When I stand on the scale or control it through the app, the scale doesn’t respond. • The scale may need to be reset. Use a safety pin or paper clip to press the reset button next to the charging port. - Page 18 • Try turning off any VPN apps. • The scale may need to be cleared. Follow instructions to clear the scale (see page 15). The scale readings seem unstable or inaccurate. • • The scale may need to be reset. Use a safety pin or paper clip to press the reset button next to the charging port.
- Page 19 Google, Android, and Google Play are trademarks of Google LLC. The Bluetooth word mark and logos are registered trademarks ® owned by Bluetooth SIG, Inc. and any use of such marks by Etekcity Corporation is under license. Other trademarks and trade names are those of their respective owners. Wi-Fi is a registered trademark of Wi-Fi Alliance ®...
- Page 20 Federal Communication Commission Interference Statement - Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
- Page 21 FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).
-
Page 22: Warranty Information
2 years from the date of original purchase. Etekcity agrees, at our option during the warranty period, to repair any defect in material or the defect or malfunction and proof of the date of purchase. - Page 23 Once our Customer Support Team has approved your request, please return the product with a copy of the invoice and order ID. Every Etekcity product automatically includes a 2-year warranty. To make the customer support process quick and easy, register your product online at www.etekcity.com/warranty.
-
Page 24: Customer Support
Customer Support If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@etekcity.com Toll-Free: (855) 686-3835 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your invoice and order ID ready before contacting Customer Support. - Page 25 Connect with us @Etekcity HS091521AC-M2_0821EFS-A591S-KUS...