Chauvet HIVE Quick Reference Manual page 3

EN
What Is
Included
To Begin
Description
Overview
AC Power
Power Linking
Fuse
Replacement
•
HIVE™
•
Power Cord
Unpack your HIVE™ and make sure you have received all parts in good
condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
The HIVE™ uses 6 large-diameter lenses to focus 18 high-power red, green,
and blue LEDs. Control options include Sound-Active modes, auto
programs, Master/Slave modes and DMX. Two personality choices are
available through 3- and 20-channel DMX modes.
DMX In
Safety Loop
Power Out
Fuse Holder
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 5 HIVE™ products at 120 VAC and 10 units at 230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse
holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
•
Warranty Card
•
Quick Reference Guide
Microphone
DMX Out
Power In
Indicator
Lights
3
HIVE™ QRG
Control
Buttons
LED Display
Back Panel View