Carrier edge TP-NHP01-A Owner's Manual page 25

OPERATING THE THERMOSTAT
1. Open the door.
2. Press the features button twice. The first press will dis-
play the outdoor air temperature and the second press
will display the humidify settings. The display will in-
clude the humidity level and the humidity setting.
3. Press the mode button until the screen displays auto
and a set at number. (Auto indicates you have put the
thermostat in auto humidify mode.)
4. Press the up or down button to change this auto humidi-
fy set at number. If there is too much condensation on
the windows, select a number lower than 5. If there
seems to be a lot of static electricity, which often means
the air is too dry, select a number higher than 5. If your
home is newer and has quality windows that create a
"tight" home, try a higher setting. If your home is older,
you might need a lower setting.
5. Close the door.
23