Canon imageFORMULA DR-C230 User Manual page 49

Hint
If [Edit after scanning] is disabled in the scanning shortcut settings, the
edit window will not be displayed.
Click the [ ] button to edit the output settings.
"Setting the output" (See p. 54)
Click the [Cancel] button to discard the scanned image and return to
the main window.
When the output has finished, a popup window will be displayed. If
saving the scanned image, a link to open the save destination folder
will be displayed.
This completes the shortcut scans.
Hint
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] link may not be displayed.
Scanning with Start Button
If you set frequently-used scans to the scanning shortcuts and assign
them as jobs, you can run shortcut scans by pressing the start button.
If you place the document, use the Job Select button to select the job
No. to be run, and press the Start button, CaptureOnTouch starts and
scanning starts.
Hint
• If the [Do not display the main screen when the scan is started with
the scanner button] checkbox is enabled in the Environmental
settings, the main CaptureOnTouch window will not be displayed
when a scan is started from the start button. Only dialog boxes and
error messages during scanning, and completion popup windows
are displayed.
• If the [Do not display the main screen when the scan is started with
the scanner button] checkbox is enabled in the Environmental
settings, [Enable additional scan] and [Edit after scanning] will be
disabled when scanning is started from the start button.
Operations for the scanned image edit
window
When scanning has finished, a preview window of the scanned image
will be displayed.
To display the edit window in the preview window, click
bar.
48
Start Button
on the tool