Canon imageFORMULA DR-C230 User Manual page 44

When the scan is finished, the [Scanned image preview screen]
opens.
Hint
If using the same document selection and output combination the next
time, click the [Save to Shortcut] button.
The Select document and Select output that you selected are added
to Scanning Shortcut. A new panel is added in the Scanning Shortcut
panel view.
CAUTION
• If you configure scanning conditions that consume a large amount of
the computer's memory, scanning may stop because of insufficient
memory. If an error message appears due to insufficient memory
while scanning is in progress, stop scanning, change the scanning
conditions, and then try scanning again.
• A multiple-page scan cannot be saved when it reaches the file size
of 2 GB. Change the save settings if an error message is displayed.
Hint
If scanning continuously, set the next document, and click the [Scan
more pages] button to start the document scan.
5
To check the scanned image, click the [Finish] button.
see "Operations for the scanned image edit
To edit scan images,
window" on p. 48
Click the [ ] button to edit the output settings.
"Setting the output" (See p. 54)
Click the [Cancel] button to discard the scanned image and return to
the main window.
When the output has finished, a popup window will be displayed. If
saving the scanned image, a link to open the save destination folder
will be displayed.
This completes the Standard Scanning.
43