Battery Indicator; Battery Safety - Entel HT840 Owner's Manual

3.To attach battery, locate the
bottom section of the battery and
press the battery against the
transceiver, and rotate the battery
screw clockwise.
NOTE: The HT840 must only be
used with the CNB840E battery
pack manufactured by Entel UK.
Failure to comply will invalidate
your USTC Certification.

3.0 BATTERY INDICATOR

For your safety and convenience your
transceiver continually monitors the
battery pack and gives an indication
on the LCD:
3 Segments : 12hours
2 Segments : 1hour
1 Segment : 20mins

3.1 BATTERY SAFETY

The battery pack of your transceiver contains lithium-Ion cells.
This type of battery stores a charge powerful enough to be
dangerous if misused or abused, especially when removed from
the transceiver. Please observe the following precautions
detailed on page 19.
18
To remove rotate the screw
anti-clockwise
Figure 5. Battery removal / attachment
Figure 6. Battery Indicator