Removing The Touch Pad Cable; Removing The Floppy Disk Drive Module - Acer TravelMate 230 Service Manual

Removing the Touch Pad Cable

1. See "Removing the Battery" on page 64
2. See "Removing the Touch Pad Frame" on page 81
3. See "Removing the Upper Case" on page 83
4. See "Removing the Touch Pad Board" on page 85
5. See "Removing the Touch Pad Button" on page 85
6. See "Removing the Touch Pad Scroll Key" on page 85
7. Remove the touch pad cable from the main board carefully.
8. Detach the touch pad cable from the upper case carefully.

Removing the Floppy Disk Drive Module

1. See "Removing the Battery" on page 64
2. See "Removing the Hard Disk Drive Module" on page 65
3. See "Removing the Middle Cover" on page 70
4. See "Removing the Keyboard" on page 71
5. See "Removing the CD-ROM Drive Module" on page 71
6. See "Removing the Heat Plate" on page 72
7. See "Removing the LCD Module" on page 73
8. See "Removing the RTC Battery" on page 81
9. See "Removing the Upper Case" on page 83
10. Remove the three screws as shown, and disconnect the FDD cable from the main board.
86 TravelMate 230/ 280