Acer TravelMate 230 Service Manual page 84

Removing the Inverter Board (14.1" LCD)
1. See "Removing the Battery" on page 64
2. See "Removing the Middle Cover" on page 70
3. See "Removing the Keyboard" on page 71
4. See "Removing the Heat Plate" on page 72
5. See "Removing the LCD Module" on page 73
6. See "Removing the LCD Bezel" on page 75
7. To remove the inverter board, first remove two screws from the inverter board.
8. Disconnect the LCD power cable and the inverter cable from the inverter board.
NOTE: 1. Please follow the numeric orders such as 1, 2, 3, and 4 to screw the inverter board to the LCD panel.
It is suggested that you reverse the sequence when you remove the screws.
NOTE: 2. Please route the cables with the inverter cable placed at the right side of the coaxial cable as shown
below before you attach the inverter board to the LCD panel.
76 TravelMate 230/ 280