Multi-Boot Menu - Acer TravelMate 230 Service Manual

Multi-Boot Menu

Users can press F12 during POST to enter the Multi Boot Selection Menu. In this menu users can change boot
device without entering BIOS SETUP utility.
NOTE: If users disable the multi boot selection menu in BIOS SETUP utility, the message " Press F12 to enter
the multi boot selection menu" will not appear during POST.
NOTE: If users disable the "Boot on LAN" option in BIOS SETUP utility, then the option of Realtek PXE2.0
Boot Agent will not appear.
Navigating the BIOS Utility
There are six menu options: System Information, Basic System Settings, Startup Configuration, Onboard
Device Configuration, System Security and Loading Default Settings.
To enter a menu, highlight the item using the
Within a menu, navigate through the BIOS Utility by following these instructions:
Press the
Press the
Press the
NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys are
shown at the bottom of the screen.
Chapter 2
1. +Removable Devices 1. +Removable Devices 1. +Removable Devices
2. +Hard Drive 2. +Hard Drive 2. +Hard Drive
3. CD-ROM drive 3. CD-ROM drive 3. CD-ROM drive
<Enter Setup> <Enter Setup> <Enter Setup>
w
w y
/ keys to move between the parameters.
p / q
keys to change the value of a parameter.
|
key while you are in any of the menu options to return to the main menu.
Boot Menu Boot Menu Boot Menu
y
/ keys, then press
e
.
35