HEIN-WERNER AUTOMOTIVE HW93642 Operating Instructions & Parts Manual

HEIN-WERNER AUTOMOTIVE HW93642 Operating Instructions & Parts Manual

Service jacks 2 ton, 3 ton

Advertisement

Quick Links

Service Jacks
Operating Instructions & Parts Manual
Model Number
HW93642
HW93652
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
HW93642-M0 rev 04202009
Capacity
2 Ton
3 Ton
10939 N. Pomona Ave. Kansas City, MO 64153
customerservices@heinwerner-automotive.com
Made in the
U.S.A.
SFA Companies

Advertisement

Table of Contents
loading

Summary of Contents for HEIN-WERNER AUTOMOTIVE HW93642

  • Page 1 Obey all safety messages that follow this symbol to avoid possible injury or death. SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 customerservices@heinwerner-automotive.com Read this manual and follow all the Safety Rules and Operating Instructions before using this product. HW93642-M0 rev 04202009...
  • Page 2: Safety And General Information

    Never use hydraulic jack as a stand alone device. After lifting, immediately support the lifted load with a pair of appropriately rated jack stands. SPECIFICATIONS Model Capacity Min. Height Max. Height Jack Size (L x W) HW93642 2 Ton 4-1/2" 20" 28-1/2" x 14-7/8" HW93652 3 Ton 5"...
  • Page 3 WARNING WARNING • Study, understand, and follow all printed materials provided with/on this product before use. • Do not exceed rated capacity. • This is a lifting device only! To avoid crushing and related injuries: • Immediately after lifting, support the load with •...
  • Page 4: Operation

    OPERATION Lifting Only attachments and/or adapters supplied by the manufacturer shall be used. Lift only on areas of the vehicle as specified by the vehicle manufacturer. 1. Follow the vehicle manufacturer’s recommended guidelines for lifting. Engage the emergency brake and chock each unlifted wheel in both directions to prevent inadvertent vehicle movement. 2.
  • Page 5: Maintenance

    MAINTENANCE Important: Use only a good grade hydraulic jack oil. Avoid mixing different types of fluid and Never use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause failure of the jack and the potential for sudden and immediate loss of load.
  • Page 6 Replacement Parts Illustration for Model HW93642 & HW93652 (refer to parts list on page 7) Frame Section Hydraulic Unit Cross Section Handle Assembly 31 30 One-Piece Handle Hydraulic Unit Base Figure 2 - Parts Illustration for Model HW93642 & HW93652...
  • Page 7 Replacement Parts List for Model HW93642 & HW93652 (refer to parts drawing on page 6) Item Part No. Description Qty. 231583 Caster, 2.5”x1.25” 201115 Lock Washer, 3/4” 219451 Hex Nut, 3/4”-10 231584 Caster Assembly (includes item# 1-3) 201803 Retaining Ring...
  • Page 8: Two Years Limited Warranty

    TWO YEARS LIMITED WARRANTY For a period of two (2) years from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy.

This manual is also suitable for:

Hw93652

Table of Contents