Table of Contents
Advertisement
Instructions for Use
a. Verify those that are marked as "(modified)" have been modified correctly
5. Tap Next to confirm alarm selection
5.1.4 Select the patient's location
A patient can only be assigned to one location.
1. Tap the relevant location label to select it
2. Tap Next to confirm the patient's location
5.1.5 Connecting the first wearable device to the patient
1. Bring the active wearable device near the mobile device until it is discovered
2. Tap Done to complete the pairing process
5.1.6 Connecting a Home Pack to the patient
1. Tap Connect Home Pack
2. Pick up the Current Health tablet and turn it on
3. On the tablet screen, tap the "Scan QR Code" button
4. Use the tablet camera to scan the QR code shown on the mobile device
5. Once scanned and authenticated, the tablet will show a greeting including the
patient's name, and present the patient's task list
5.1.7 Fitting the wearable to the patient
Correct fitting is critical to obtaining good-quality vital sign data. The wearable device must
be in contact with the skin at all time. The wearable device must not be fitted in a way that
allows the wearable device to lift away from the skin. The wearable device must keep a
stable position during the patient's normal activities
1. Select the location
www.currenthealth.com
200002/1
Page 32 of 61
Advertisement
Table of Contents
